GRAPPLES

for trees, bush and roots

High Strength Grasping Tool
for Trees, Brush and Roots

EZ Grapple for trees, brush and roots features HIGH STRENGTH Steel construction with a 50″ opening to grasp large objects.

AR400 steel upgrade is an option.

EZ Grapple
+
GRADE 50 STEEL
AR400 OPTIONAL
+
50" Opening
+
Upper and lower tines are 1/2" thick GRADE 50
AR400 STEEL OPTIONAL
+
Hydraulic cylinders and cylinder rods are guarded
+
Abrasive blasted and powdered coated
  • 50″ opening easily grasps large objects
  • Upper and lower tines are 1/2″ Thick GRADE 50 high strength steel.
  • 4″x4″x1/4″ upper and lower frame tubes
  • 2.5″x8″ welded hydraulic cylinders
  • Hydraulic cylinders and cylinder rods are guarded
  • 1/2″ thick one piece GRADE 50 brace between tine points.
  • 1.5″ diameter, CF 1045 pivot pins through thick wall greasable bushings at all pivot points
  • Abrasive blasted and powdered coated
  • Dimensions 57″ high with grapple open
  • 47.5″ front to rear

STEEL STRENGTH COMPARISON

Grade Tensile Yield Hardness
AR400 180 ksi 140 ksi 364–444 BHN
T1 110–130 ksi 100 ksi 235–293 BHN
Grade 50 65 ksi 50 ksi 135 BHN
A36 Mild 58–80 ksi 36 ksi 119–159 BHN

MODEL COMPARISON

EZ-5072 $3300 EZ-5081 $3460 EZ-5090 $3590
Width 72″ 81″ 90″
Tines 9 10 11
Spacing 9″ 9″ 9″
Grapple Opening 50″ 50″ 50″
Weight #940 #1000 #1060

Tensile strength —

The point where the steel breaks.

Yield strength —

The point where the steel permanently bends.

BHN hardness —

Higher numbers are more wear resistant.

KSI —

PSI x 1000 (Ex: 180 ksi = 180,000 psi)

CL Fabrication INC. reserves the right to change its products or their specifications at any time without notice or obligation.

EZ Grapple BackEZ GrappleEZ Grapple Close UpEZ Grapple Euro Global MountEZ GrappleEZ GrappleEZ GrappleEZ GrappleEZ GrappleEZ GrappleEZ Grapple on John DeereEZ Grapple 50" OpeningEZ Grapple OverheadEZ Grapple with Tree TrunksEZ Grapple with Tree Trunks

Call CL Fabrication: 712-542-5500  •  sales@clfab.com